How to perform a tracert?

How to perform a tracert:

1.) Click the start menu and choose or type (then hit enter) run

2.) In the box that pops up, type in cmd and hit enter.

3.) In the black box that pops up, type in tracert serverip (where serverip is your server IP or DNS, such as ??.gomanilahost.net) and then hit enter.

4.) You will start to get a lot of data appearing in the black area. It should look similar to this:

C:\Users\John>tracert seattle.gomanilahost.net

Tracing route to seattle.gomanilahost.net [208.146.44.132]
over a maximum of 30 hops:

1 1 ms <1 ms 1 ms my.router [192.168.1.1]
2 9 ms 15 ms 8 ms comcast.router [73.104.252.1]
3 9 ms 6 ms 7 ms local.comcast.router [68.87.205.65]
4 7 ms 7 ms 8 ms po-10-ur02.seattle.wa.seattle.comcast.net [68.85.240.110]
5 11 ms 9 ms 6 ms be-70-ar01.seattle.wa.seattle.comcast.net [68.85.240.105]
6 16 ms 8 ms 17 ms pos-0-10-0-0-cr01.seattle.wa.ibone.comcast.net [68.86.90.209]
7 7 ms 7 ms 9 ms te-3-3.car1.Seattle1.Level3.net [4.79.104.109]
8 8 ms 8 ms 7 ms ae-24-52.car4.Seattle1.Level3.net [4.68.105.37]
9 27 ms 28 ms 28 ms INTERNAP-NE.car4.Seattle1.Level3.net [4.71.156.102]
10 26 ms 27 ms 27 ms border25s.gi5-2-bbnet1.sea.pnap.net [63.251.160.42]
11 8 ms 8 ms 17 ms gomanilahost-39.border25s.sea.pnap.net [206.191.144.42]
12 8 ms 8 ms 8 ms 208.146.44.132

Trace complete.

C:\Users\John>

5.) When it's done, copy the data by right-clicking on the title bar and going to "edit > select all" and then "edit > copy"

6.) Paste the information that you just copied via support ticket and include your personal IP address AND a short description of the type of lag you are experiencing i.e. ping, loss, choke etc.!

  • tracert
  • 0 Users Found This Useful
Was this answer helpful?

Related Articles

How to Access your Folders(Linux/Centos) using WinSCP

Guide on how to access the folders in your vps linux! This is the easiest way, First make sure...

Changing Time Zone

Changing Time Zone in Linux:1. Login to your VPS server using Putty. 2. Type the following...

To change the VPS password (WinSCP / Putty)

To change the VPS password (WinSCP/Putty)   1. Login to SSH via xShell4 (Recommended) or Putty...

How to solve Permission denied Issue in Putty

To resolve the Permission denied issue in Putty (e.g. -bash ./configure: Permission denied)Login...

MySQL Table says IN USE, but table will not repair in PHPMyAdmin

From time to time MySQL corrupts itself. This message means that your table needs repair,...

Powered by WHMCompleteSolution